ARAMR - 4.5MM LOCKING PLATE SYSTEM INSTRUMENT SET
Trauma instrumentation meets surgeon's requirement in precision and ease of use. Specially designed instrumentation considering suggestions from surgeons. Instruments are specially designed to have minimum soft tissue damage. Instruments are made from superior grade materials.
Benefits
01
4.5mm Locking Plate System Instrument Set is a comprehensive system of instruments for stabilization of the Femur Bone
02
Accurate Sizing of Components
03
Precise Component Alignment
04
Intuitive Design
05
Streamlined
Size Chart
| Actual Part No. | Description |
|---|---|
| MT-INLLPS001 | Drill bit Ø3.2mm, Length 145mm, 2-flute, for Quick Coupling |
| MT-INLLPS002 | Drill bit Ø4.3mm, Length 270mm, 2-flute, for Quick Coupling |
| MT-INLLPS003 | Drill bit Ø4.5mm, Length 145mm, 2-flute, for Quick Coupling |
| MT-INLLPS004 | Countersink for 4.5mm Screw Head, Length 130mm |
| MT-INLLPS005 | Tap for Cortex Screws Ø4.5mm, Length 130 mm for quick coupling |
| MT-INLLPS015 | Ø3.2 Insert Drill Sleeve |
| MT-INLLPS010 | LPS Drill Sleeve 5.0, for Drill Bits Ø4.3mm |
| MT-INLLPS017 | Drill Sleeve OD4.3mm & ID2.0mm |
| MT-INLLPS013 | Double Drill Guide 4.5mm & 3.2mm, for Neutral and Load position |
| MT-INLLPS011 | Universal Drill Guide 4.5mm & 3.2mm |
| MT-INLLPS024 | Screwdriver, Hexagonal, A/F 3.5mm, with Groove & Holding Sleeve |
| MT-INLLPS020 | Screwdriver Shaft 3.5, hexagonal, self holding |
| MT-INLLPS021 | Screwdriver, hexagonal, large, Ø3.5mm, with Groove, Length 305mm |
| MT-INLLPS019 | Torque Limiter Screw Driver 3.5mm Hex Self Holding 4Nm |
| MT-INLLPS037 | Tension Device - LLPS |
| MT-INSLPS026 | Wrench-SLPS |
| MT-INLLPS038 | Broken Screw Extractor - LLPS |
| MT-INLLPS036 | Extraction Screw for 4.5mm/5.0mm Screws |
| MT-INSLPS031 | T-Handle with Quick coupling SLPS |
| MT-INLLPS030 | Screw Holding Sleeve, 4.5mm/5.0mm Screw |
| MT-INLLPS033 | Reduction Forceps With Points ( Large ) |
| MT-INLLPS034 | Termite Stagbeetle ( Large ) |
| MT-INLLPS035 | Bone Holding Forceps, Self Centering for LLPS |
| MT-INSLPS017 | Guide Wire - Krischner - SLPS |
| MT-INLLPS031 | Bending Iron for Plate - Type A - LLPS |
| MT-INLLPS032 | Bending Iron for Plate - Type B - LLPS |
| MT-INLLPS026 | Bending Template for 4.5mm Low Contourable Dual Compression Plate, Length 210mm |
| MT-INLLPS027 | Bending Template for 4.5mm Low Contourable Dual Compression Plate, Length 120mm |
| MT-INLLPS028 | Bending Template for 4.5mm Low Contourable Dual Compression Plate, Length 155mm |
| MT-INLLPS025 | Depth Gauge for Screws 4.5/6.5mm, measuring range up to 100mm |
| MT-INLLPS022 | Cleaning Driver |
| MT-INLLPS012 | Double Drill Guide 4.5mm & 3.2mm |
| MT-INLLPS039 | Instrument Case with Lid - LLPS |
Clinical Data
Product IFU
Note: IFU will be displayed after MDR Certification